Emax Babyhawk-R RACE(R) Edition 112mm F3 Magnum Mini 5.8G FPV Racing RC Drone 3S/4S PNP/BNFThe original replace parts, you can click
here to buy together.
Specification:Brand Name: EMAX
Model: Babyhawk R
Item Name: 112mm Wheelbase F3 Magnum 5.8G FPV Racing Drone
Material of Frame: Carbon Fiber
Wheelbase: 112mm
Arm Thickness: 3mm
Weight: 82.5g ( without battery)
Flight Controller & ESC : Emax F3 Magnum FC & 12A 4 In 1 ESC mini Flytower
Motor: Emax RS1106 6000KV Brushless Motor
Propller: Emax Avan Micro 2 Inch 4-Blade Propeller
VTX: 5.8G 40CH 25/200mW Switchable VTX
Camera: Foxeer Micro Arrow 650TVL Micro CCD Camera
Version: PNP Version ( Without Receiver)
BNF Version ( With Emax Tiny Receiver, compatible with Frsky D8 Mode )Lipo Battery: Support 3S / 4S Lipo Input
Emax F3 Magnum FC & 12A 4 In 1 ESC mini FlytowerTower Height: 19mm
Tower Net Weight: 8.65g
Mounting Hole: 20x20mm
F3 Flight Controller | Firmware | Omnibus F3 Betaflight Target |
MCU | STM32F303 |
Accelerometer/Gyro | MPU6000 ( Connected via SPI ) |
OSD | Built-in betaflight OSD |
Buzzer | On-Board |
BEC | Integrated with 5V@ 3A BEC output |
LED Pad | Addressable |
Avaliable Receiver Type | PPM/SBUS/Spektrum DSM |
Size | 24x24mm; 20x20mm (M2) Mounting Hole |
Net Weight | 3.32g |
12A BL_S 4 In 1 ESC | Con. Current | 12A |
Burst Curren | 15A (10S) |
Support Voltage | 3-4S Lipo |
Firmware | BLheli_S |
MCU | EFM8BB21F16G , 50mhz |
Choic of Protocol | DShot up to 600, Multishot, Oneshot125 |
PCB Board | 30z High TG PCB Board |
Size | 24x25mm ; 20x20mm ( M2 ) Mounting Hole |
Net Weight | 4.40g |
Features: -High Speed power system featuring RS1106 and the Avan Micro
-FC/ESC AIO - Mini Magnum Tower
-112mm Carbon Fiber Frame
-Only weighs 82.5 grams
-Customizable Shell Canopy with adjustable camera positions
-Pre-tuned Betaflight Firmware for optimized flight performance
-OSD integrated with Low-Voltage detection
-40 Channel 5.8g VTX switchable 25/200mw
-Compatible with EMAX Transmitter/Goggles/Accessories
-Utilizes Micro CCD Sensor Camera
-Accepts 3-4 cell LiPo batteries
Babyhawk Race Key Features
FRAME
-Light weight carbon fiber frame with impact resistant plastic canopy available in several colors
-Strong 3mm arms with lower profile arms to reduce drag.
-Integrated flight controller vibration dampening system for a smoother and more locked in feeling flights
POWER SYSTEM
-Powered by the new Magnum Mini tower system with F3 FC + 4 in 1 12A BLHELI S ESC 3-4s
-Betaflight Firmware 3.2.X with comes pre tuned at the factory for optimized flight performance
-Class leading Emax RS1106 6000kv brushless motors paired with the new Avan 2” quad blade propeller for maximum speed and control.
FPV SYSTEM
-650TVL Micro CCD camera with tuned profiles for different light condition. CCD is preferred by more pilots over CMOS for its better handling of high contrast lighting and resistance to “jello” in your flight video.
- Canopy has adjustable camera positions so pilot can tune for track speed and size.
- 40 Channel 5.8g VTX with LED info display and switchable transmission power from 25/200mw
Package Included:
1x Emax Babyhawk R 112MM Frame
4x Emax RS1106 6000KV Motor
1x F3 Magnum F3 Flight Controller
1x 12A BLheli_S 4 In 1 ESC
4x EMAX AVAN Micro 2 Inch Propeller
1x Emax Receiver ( Only BNF Version has)
1x 650TVL mini Camera
1x 5.8G 40CH 25/200mW VTX
![](https://imgaz.staticbg.com/images/oaupload/banggood/images/E4/3A/fbff4d2c-7c93-45cb-b329-b276d5bec681.jpg)
,
![](https://imgaz.staticbg.com/images/oaupload/banggood/images/5E/ED/00149e28-b330-4b60-83bc-c1d1b3500dba.jpg)
,